pneuCONVEYOR – Turbo Mill has been developed basically to maintain the batch sanctity for the requirement of uniform sizing of dried granules and to obtain an output with a negligible product loss.
The earlier system used to be : To pass the dried granules through Sifter and then pass the oversized granules through the Multi Mill or to pass the dried granules through the milling machine. Now the same process is done through using single equipments – Turbo Mill. The machines operate under vacuum also.
• High productivity machine with a capacity of 200 to 500 Kgs. output per minute.
• Easy Dismantling, Cleaning and Reassembling in short duration of 10 to 15 Min.
• The sieve drums are available in 4 to 40 mesh sizes and can be easily changed for different products.
• Machine is portable and compact, mounted on a sturdy SS304 frame.
• Feed and Product discharge is continuous and has Dust free transfer system, both For charging and discharging of product.
• Complete Vibration free and Soundless design.
• Complete tool less design for easy Dismentaling and Assembly to reduce downtime.
• Complete tool less design with minimum Vibration and Sound.
• Machine can easily dismantled, cleaned and assembled within 10-15 min reducing the Production Downtime and hence Increasing Productivity.
Turbo Mill is a non-vibrating screening machine. It is available in different capacities. Material is fed via. screw feeder impeller rotating at 144 to 288rpm, between a stationary screen basket having a screen fitted very tightly. The impeller and basket are fitted horizontally in a closed dust proof body. From the top material is fed from bottom the fine and coarse powders are collected. Separation of powder is effected by the air turbulence created by the impeller, which pushes out finer powder through the screen aperture. Oversize is then pushes to milling process connected with machine, whereby its cut to the size of the mesh fitted & finally connected to the discharge of final powder. Excellent for separation of fine, free flow, nonabrasive powders from 60 to 300 mesh.
Capacity: pharma/food/chemical powders 60 mesh 1000 kgs/hr. 200 mesh 500 kgs/hr; Power: 3 to 7.5 HP
Turbo Mill offer high efficiency separation and high throughputs. Easy to clean designs are available with quick release disassembly without tools. A range of screen sizes are available and may also be quickly and easily removed, cleaned and replaced.
Our exclusive pneuCONVEYOR – Turbo Mill design is totally enclosed and operates quietly and efficiently with no dust issues, motion or vibrations. We are also proud to offer a brand name pneuCONVEYOR – Turbo Mill, which was specifically designed for heavy duty pre-scalping by trapping and protecting the sieve cloth from tramp metal, stones and other unwanted particles. These Turbo Mill are ideal for sizing, sifting, scalping, classifying, and breaking of agglomerates.
peuCONVEYOR – Turbo Mill offer more throughput capacity per screen area than any conventional screening & milling equipment. Our maintenance-friendly design allows large, quick-opening access doors to be easily installed that ensure access to the sieve chamber and all internal working parts. Virtually no tools are required for screen frame assembly changes and changing or replacing these screens takes only minutes.
TECHNICAL SPECIFICATIONS :
SCREEN CAGE SIZE (MM) (diameter * length Sifting/Milling)
SS304 / SS316
250mm * 650mm/250mm
SS304 / SS316
350mm * 800mm/250mm
SS304 / SS316
500mm * 1300mm/350mm